Haysenser HDMI over Ethernet Extender 120m

• Using a Cat5e/6 cable to extend the HD signal with audio up to 395ft(120m)
• Support IR extender function and allows IR remote control of source devices from remote viewing location by sending IR commands received in the vicinity of the display back to the source devicesack to the Source devices
• Support HDMI 1.3, HDCP1.1 & 1.2 protocol compliant and following TCP/IP standard
• Support the point-to-point mode, one point-to-many mode and cascade connection mode through an unmanaged, dedicated Gigabit Ethernet network switch.
• It is widely used(such as DVD, PS3, STB) and support full HD up to 1080P

SPECIFICATIONS

Resolutions: 480p,576p,720p,1080p
Audio: Sample rate: 32kHz, 44.1kHz and 48kHz IR remote control: 38KHz; NEC
HDMI: HDMI 1.3
HDCP: HDCP 1.2, 1.1
Power adapter: Input: 100V – 240V (50 – 60Hz)
Power consumption:
Sender: 3W
Receiver: 3W
Operating and Storage Temperature/Humidity: 0- 70 degrees/10% – 80%RH(no condensation) & -10 – 80 degrees/ 5% -90% RH(no condensation)

CONNECTION AND OPERATION

Easy To Use
1)Connect the HDMI source (such as DVD, PS3, STB) to the HDMI IN of Sender.
2)Connect the IR sender to the Sender IR OUT Port, and be Directed at HDMI video source?¡¥s IR receiver.
3)Connect the HDMI out of Receiver to HDTV display.
4)Connect the IR receiver to the Receiver IR IN Port.
5)Use 1 Cat5e/6 cable up to 120m to connect the Sender and Receiver.
6)Plug 2 pieces of 5V power supply into the Sender and Receiver.
7)Power on the HDTV display and HDMI source.