Kingston 16GB PCH-2666 DDR4 Laptop Memory – (KVR26S19D8/16)
BD 35.000 Exclusive of VAT
Kingston 16GB DDR4 Laptop RAM
Out of stock
DESCRIPTIONThis document describes ValueRAM’s KVR26S19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: |
|
FEATURES• Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Dual-rank • On-board I2 serial presence-detect (SPD) EEPROM • 16 internal banks; 4 groups of 4 banks each • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) • Selectable BC4 or BL8 on-the-fly (OTF) • Fly-by topology • Terminated control command and address bus • PCB: Height 1.18” (30.00mm) • RoHS Compliant and Halogen-Free |
|
CL(IDD) | 19 cycles |
Row Cycle Time (tRCmin) | 45.75ns(min.) |
Refresh to Active/Refresh Command Time (tRFCmin) |
350ns(min.) |
Row Active Time (tRASmin) | 32ns(min.) |
Maximum Operating Power | TBD W* |
UL Rating | 94 V – 0 |
Operating Temperature | 0o C to +85o C |
Storage Temperature | -55o C to +100o C |
Reviews
There are no reviews yet.